Creation and Editing of Headers/Footersd
Updating the Internal Header/Footer Information of the Copyboard
Two ways of updating the information are available. One way is to transfer the information to the Copyboard by connecting the Copyboard and personal computer via a USB connection. The other way is to save the information in USB memory and then insert the USB memory directly in the USB port of the Copyboard.
Updating by Establishing a USB Connection between the Copyboard and the Personal Computer
1.Open the header/footer file
- 1.Establish a USB connection between the Copyboard and the personal computer. See Page E-5 for information about the connection
- 2.Click the main menu [Setup] button → [Header/Footer] tag, and display the “Header/Footer” screen.
- 3.Clicking [Open file] will display the “Open file” screen of the personal computer. Select the target header/footer file (having the .hfd extension), and click the [Open File] button of the “Open file” screen.
2.Transferring the header/footer file to the Copyboard
Click the [Transfer] button.
This starts the transfer. The verification screen will be displayed
when the transfer is completed. Click [OK].
- ・During the transfer [HF] will flash in the display window of theCopyboard.
Transfer to the Copyboard is completed.
When closing this software, see step 5 on page E-14.
4.Updating the Header/Footer Information
Press the [Save] button of the Copyboard control panel.
The flashing [HF] of the Copyboard display window will change to the [H1] display.
This completes the update.
Press a button other than “Save” or “Feed/Stop” (“Page change”on model M-125) on the main unit’s control panel. [H1] of the Copyboard display window will change to the [01] display and the normal mode will be set.
To restore the header/footer to the default setting (only the date and time displayed), press the “Feed/Stop” button (the “Page change” buttons on model M-125). The display will change to the [H0] display of the Copyboard display window.
Creation and Editing of Headers/Footers
- 1.Save the header/footer file in the USB memory.
Do not save within a folder of the USB memory. When USB memory is inserted in the USB port of the Copyboard, the Copyboard will search for the .hfd file. If the file has been saved within a folder, reading of the file will not be possible.
Note also that you should save only the target file. Reading will not be possible when multiple header/footer files exist. - 2.Insert the saved USB memory into the USB port of the Copyboard.
When the header/footer file has been found, [HF] will flash in the display window of the Copyboard. - 3.Press the [Save] button of the Copyboard control panel.
When the updating of the header/footer information is completed, the Copyboard display window will change to display [H1].
Press a button other than “Save” or “Feed/Stop” (“Page change” on model M-125) on the main unit’s control panel. [H1] of the Copyboard display window will change to the [01] display and the normal mode will be set.
To restore the header/footer to the default setting (only the date and time displayed), press the “Feed/Stop” button (the“Page change” buttons on model M-125).
The display will change to the [H0] display of the Copyboard display window.
Caution:When printing header/footer information or adding it to a transfer image, go to [Setup] and set [Header/Footer] of [Hardware Setup] to “Enable”. (See Page E-17)
